How-to

How to professionally wax your vehicle

How to professionally wax your vehicle

You need to wash your vehicle and shammy it after to take away water spots.

When waxing only use cloths for that wax (when using a cloth to apply and a cloth to buff off for step 1only use them for Step1 don't use the same cloths with Step 2 or 3)

To start waxing your vehicle put it in a shaded area. Apply the Scratch Remover on the scratch and buff it off in a circular motion

Apply Step 1 with a clean cloth then let it dry and buff it off with a separate cloth. Don't leave it on the paint to long because its a pain to take off. Use only step 1 cloths for Step1.

Step 1 needs to be applied more than 1 time if its an older vehicle, minimum 3 times. Step 1 removes oxidation which is the faded look cars get when not protected. It also removes all previous waxes

Apply Step 2 the same way you applied Step1, preferably it would be best with two coats of this. Step 2 seals the paint and gives it a dark wet look. Use separate cloths for Step 2.

Apply this the same way as Step2, with 2 coats. Step 3 gives the best protection you can get from a wax. Separate cloths for Step 3

When all steps are applied ( you only need to apply each step once if you want, it just looks better when extra coats are applied) the wax is good for a year till you should do it again.


Watch the video: 14 BAD Detailing Mistakes You Must Avoid: ATA 106 (January 2022).